|
Post by m4tt1kus on Oct 9, 2007 23:24:36 GMT -5
Lowest I've seen ran on dega is 48.6, I run a 48.8 but I just started getting into the COT. Heres the trick to the superspeedways though. Don't worry much about gearing or your speed by yourself. Get your handling somewhat tight, but not to much, and learn to draft. You can make it to first on a motor, but then everyones gonna eat you up in the draft. Hang back in the races till the end.
|
|
|
Post by H1-RACING on Oct 20, 2007 16:11:36 GMT -5
can someone at least tell me what your PSI should be for super speed ways cot I can take it from there thx?
|
|
|
Post by shane on Nov 18, 2007 21:28:26 GMT -5
i really need that setup i cant get my car over 200+
|
|
|
Post by scott383 on Nov 22, 2007 20:52:23 GMT -5
can i get the set p to my e mail is sfcaulking@cox.net thanks
|
|
|
Post by zander on Dec 21, 2007 8:59:14 GMT -5
I have a decent setup for dega and daytona, but would like to compare some others,please email me your setup also at, zander68@optonline.net
|
|
|
Post by ONEZX on Feb 2, 2008 19:24:59 GMT -5
I NEED A GOOD SETUP FOR COT FOR DAYTONA
BRIAN.FREEMAN2@COMCAST.NET
|
|
|
Post by grantbs41 on Feb 4, 2008 17:58:27 GMT -5
Looking for Dega setup grantbs41@gmail.com
|
|
|
Post by CASINOMANAGER08 on Feb 10, 2008 12:35:46 GMT -5
I have a setup for 360 cot daytona 48.2 or less my gamertag is CASINOMANAGER08
|
|
|
Post by AssDrafter on Feb 13, 2008 18:29:37 GMT -5
Hey guyz sum1 e-mail me your sweet-Ass setup for Daytona speedway...THX!!! mbp0002@auburn.edu
|
|
|
Post by RebelBoy on Feb 29, 2008 23:06:40 GMT -5
there is a couple setups for daytona under the ps3/360 section of the 08 section
|
|
|
Post by Racer24 on Mar 1, 2008 2:30:39 GMT -5
Is there any way I can get that setup for dega and daytona. I am trying to be competative but I keep getting kicked because I only have gotten up to 194 and no better and I mess with setting all the time. if you could thanks Erik_Halfmann@Hotmail.com
|
|
|
Post by NASCARZ333 on Mar 5, 2008 23:09:48 GMT -5
I need help. If someone could send me a good dega or daytona set-up so that I may also run 200+, that would be great.
JeffCrisp@comcast.net
|
|
howiroll
Newbie
360 setup helper
Posts: 30
|
Post by howiroll on Mar 7, 2008 11:08:56 GMT -5
There are some already posted here. I know, cause i posted them myself.
Roll Out!!
|
|
|
Post by j242fast on Mar 7, 2008 16:11:10 GMT -5
This set will go 206 in the draft. It will be a little lose, but it is fast. From the basic set up screen: Acc.- all the way to the right. Tight- All the way to the left and tap it to the right 4 times. Speed- Leave it at 0 I think handling is next don't do anything to it.
AREO: Splitter- 4.00 Grill Tape-85% 100% to qual. Rear wing- 0%
Suspension Front Swy 2 inches Front Left Bump 2 Rebound 2 Spring 1200 Ride Height 5.750
Left Rear Bump 3 Rebound 4 Spring 450 Ride Height 5.833 Track bar 9.750
Front Right: Bump 3 Rebound 2 Spring 1250 Ride Height 5.917 Rear Sway Bar 7/8 inch
Right Rear Bump 3 Rebound 4 Spring 450 Ride height 6.00 Track Bar 10.625
Tire Pressure: FL Fr 30..0 48.00 Camber 5.0 -5.5 Caster 3.0 3.5
RL RR Cold Press. 32.0 48.50 Camber 1.8 -1.8
Front toe in -1/32 Rear toe in -1/32 Wedge 53.0 Front Bias 50.0 Left 54.2 Gearing 3.40/1 1- 2.11/7.18 2-1.46/4.96 3-1.20/4.06 4-.88/2.97
This is for Daytona don't have one for Tega.
|
|
howiroll
Newbie
360 setup helper
Posts: 30
|
Post by howiroll on Mar 10, 2008 11:19:29 GMT -5
I'm going to give this gearing a try since you say, it's fast. I’m happy with the suspension setup I’m using but need better gearing for faster runs (COT). Right now, I’m averaging say around, 48.2 to 48.4 without draft. I need a good restart gearing.
Thanks, Roll Out!!
|
|