|
|
Post by u got it 97 on Feb 22, 2009 11:54:48 GMT -5
Does anyone have a good Craftsman Truck setup for Daytona, because I keep trying to get mine faster, but can't seem to do it.
|
|
|
|
Post by Guest on Dec 28, 2009 11:41:41 GMT -5
I have a really good daytona set up that i usually run low 48's with.
Grille Tape 100% Qualify
80% Race
F.L. F.R.
Fender Flare 0.00% Fender Flare 0.00%
Rear Spoiler 55
Suspension.
F.L. F.R.
Bump 9 Bump 9
Rebound 3 Rebound 4
Spring 1500 lbs/" Spring 1500 lbs/"
Ride Height 5.875" Ride Height 5.708"
R.L. R.R.
Bump 3 Bump 3
Rebound 4 Rebound 4
Spring 400 lbs" Spring 400lbs"
Ride Height 6.167' Ride Height 6.000'
Track Bar 8.750 Track Bar 9.750
Front Sawy bar 1 9/16"
Rear Sway bar 9/16"
Tires
F.L F.R.
Cold Press. 34.0 PSI Cold Press. 44.0 PSI
Camber6.0 Camber -3.9
Caster 3.0 Caster 6.0
Rear L. Rear R
Cold Press 34.0psi Cold Press 42.0 psi
Camber 1.8 camber -1.8
F.toe in 1/8"
R.TOE IN 3/32"
Weight Distribution
Wedge 47%
Front Bias 50.0%
Left Bias 54.2%
Drivetrain
Differential Ratio 3.07:1
1st 2.11'/6.48
2nd 1.48/4.54
3rd 1.17/3.68
4th 0.96/2.94
|
|
