|
|
Post by sicvick2008 on May 19, 2008 9:22:31 GMT -5
Need information on setups on COT's. Would appreciate anyones help. Thanks
|
|
|
|
Post by Bennettracinteam on May 19, 2008 19:59:00 GMT -5
|
|
|
|
Post by houndog52 on May 27, 2008 8:05:07 GMT -5
Look around man....there everywhere here,lol
Is it "legal" to link to other setup forums on this forum?
|
|
|
|
Post by sicvick2008 on May 27, 2008 9:25:15 GMT -5
Every track I go to I have a problem with front and back wheels sliding. What can I do to fix this problem?
|
|
|
|
Post by houndog52 on May 27, 2008 23:11:16 GMT -5
Someone just made a thread about tires sliding? probably you? lol
You might have a decent car too and just make too sharp turns. Or too sudden.
Stay Smooooooooooooooooooooth. lol
|
|
|
|
Post by Da Crew on Jun 4, 2009 16:51:01 GMT -5
Here is a Martinsville Setup
Suspension+1 to the right
Grill Tape 15%
Wing 16
Splitter 6.00
Suspension
Front Left Front Right
Bump 3 9
Rebound 9 6
Spring 450 600
Ride Height 4.500 Default
Left Rear Right Rear
Bump 1 1
Rebound 9 2
Spring 100 150
Ride Height 6.033 7.500
Track Bar 10.25 11.50
F. Sway Bar 2 R. Sway Bar 1
Tires
Front Left Front Right
Cold Press. 15.5 37.0
Camber 1.9 -0.8
Caster -2.0 6.0
Left Rear Right Rear
Cold Press. 17.5 31.0
Camber 1.8 -1.8
Weight
Wedge 49.4
F.Bias 49.5
L. Bias 54.2
Drive Train
Diff Ratio: 5.83/1
1st: 1.50/8.75
2nd: 1.30/7.58
3rd: 1.13/6.56
4th: 1.00/5.83
Brake Bias 55/45
Brake Press: 95%
Steering Trim: 3.4
Steering Lock: 11.5
You will need to turn these assists on high (Anti Lock Brakes/Stability Controll/Steering Help/Traction Controll.
A manual Tranmission is the recommended, because you will need to shift to 3rd gear going into the turns.
The car may be loose, but if you click to the right to put more tight, you can get more runs on the turn.
|
|
|
|
Post by Da Crew on Jun 4, 2009 16:56:06 GMT -5
Here is a Las Vegas Setup
Splitter: 5.75
Grille Tape: 60%
Wing: 15
Suspension
LF:
Bump: 5
Rebound: 7
Spring: 950
Ride Hight: 4.625
LR:
Bump: 4
Rebound: 6
Spring: 350
Ride Height: 5.994
Trackbar: 9.50
FSB: 1 3/4
RSB: 0
RF:
Bump: 4
Rebound: 6
Spring: 1350
RR:
Bump: 3
Rear: 5
Spring: 525
Ride Height: 6.875
Trackbar: 10.750
Tires:
LF:
Pressure: 24.0
Camber: 4.5
Caster: 3.5
LR:
Pressure: 24.0
Camber: 1.8
F Toe: 1/32
R Toe: 1/16
RF:
Pressure: 44.0
Camber: -2.5
Caster: 3.5
RR:
Pressure: 44.5
Camber: 1.8
Weight:
Wedge: 50.0
Front: 51.0
Left:50.0
Drivetrain:
Ratio: 3.70
1rst: 2.43
2nd: 1.57
3rd: 1.17
4th: 0.95
BrBias: 65/35
BrPressure: 90%
StTrim: 2.5
StLock: 8.5
This setup can be used for the NEXTEL or the COT
If you run like I run, Ride in the gas all the way through turns one and two, you can pick up more speed on the straights.
|
|
